Blade Size C500mm Gasoline Concrete Cutter

Shunhang machine,located in Henan China. The company main Concrete Cutter production include the Blade Size 500mm、the Blade Size 1000mm、Electric Concrete Cutter、 Gasoline Concrete Cutter、Diesel fuel Concrete Cutter.  Shunhang machine is the leader Concrete Cutter exporter and supplier. Today Shunhang machine,  more than 250 employee、an annual output of about 20000 concrete cutter、more than 100 set equipment、near 20000 set production in stock.

Product Parameters

Feature：

1.Gasoline engine of Blade Size 500mm Concrete Cutter is used to provide efficient power output and adapt to different working environments.

2.Blade Size 500mm Gasoline Concrete Cutter was Equipped with high hardness diamond blade, through high-speed rotation to achieve accurate cutting, the maximum cutting depth up to 180mm

3. Blade Size 500mm Gasoline Concrete Cutter : hydraulic or mechanical walking system, support manual or automatic propulsion, to ensure the smooth cutting process, high linear accuracy.

4. Water spraying device of the gasoline Concrete Cutter is used for cooling and dust removal, extending blade life and reducing environmental pollution.

Instructions:

1. Wear protective gear 'Avoid loose clothing and tie up long hair before use the Blade Size C500mm Gasoline Concrete Cutter

2. Clean up the debris in the working area and ensure that the ground is smooth and free of obstacles , then activate the Blade Size C500mm Gasoline Concrete Cutter

3. Oil level, confirm that no leakage saw blade is installed firmly, water tank sufficient

4. Change the oil and clean the air filter every 50 hours

5. Smear the saw blade with anti-rust oil and store the equipment in a dry and ventilated place

6. Mark the cutting path with chalk or ink, making sure to line up with the saw blade.

7. Slowly press down the handle so that the saw blade touches the ground and maintains uniform speed