Overview and use of polishing machine

Summarize

The polishing machine is also known as the finishing machine, its main structure is a gasoline engine driven trowel rotor, the bottom of the cross in the middle of the rotor is equipped with a trowel. The tilt direction of the trowel is consistent with the rotation direction of the rotor, and the triangular belt driven by the gasoline engine makes the trowel rotor rotate. When operating, first hit the fire, hold the control handle, the two push forward together is to move forward, pull back together is to move back. It can do 100~300m2 per hour on average, and can improve the working efficiency by more than 30 times compared with manual polishing.

How to use:

1. Start the polishing machine and operate the handle

2, grip the joystick, let the fuselage balance

3, when the polishing machine is working, be sure to hold the polishing machine steady, and adjust the direction in time when working on the floor, so as not to lose control of the machine

4, first rough grinding, after fine grinding. After coarse grinding of the bottom disk, wait for the ground

It is a kind of concrete surface rough, fine polishing machine. The surface of the machine construction is smoother and more flat than that of the manual construction, which can greatly improve the compactness and wear resistance of the concrete surface, and improve the work efficiency more than 10 times than that of the manual operation in effect. Ground polishing machine can be widely used in high standard factory buildings, warehouses, parking lots, squares, airports and frame buildings of the concrete surface of the pulp, smoothing, smoothing. It is the preferred tool in concrete construction.