650mm Single Drum Compaction 1.5 Tons Walk Behind Road Roller

Production feature :

1.Be flexible and efficient, 650mm Single Drum Compaction 1.5 Tons Walk Behind Road Roller is suitable for narrow areas (such as road shoulders, grooves, sidewalks) and complex terrain, with a minimum turning radius as low as 1 meter.

2.650mm Single Drum Compaction 1.5 Tons Walk Behind Road Roller is light weight , easy to transport, can be transferred by small truck or trailer.

3.650mm Single Drum Compaction 1.5 Tons Walk Behind Road Roller with good compacting property.

4.Vibration type can produce 5-20kN exciting force, static line pressure up to 20-50N/cm, suitable for layered compaction.

5.High frequency vibration (about 40-60Hz) to enhance the density of asphalt or sand.

Production parameter

Pay attention maintenance points

1.Safe operation guide to 650mm Single Drum Compaction 1.5 Tons Walk Behind Road Roller  

Wear protective equipment (gloves, earplugs, non-slip shoes) and avoid driving sideways when working on slopes.

The newly paved asphalt pavement should control the temperature (> 110℃) to prevent sticking wheels.

2. Daily maintain 650mm Single Drum Compaction 1.5 Tons Walk Behind Road Roller  

Check the oil and hydraulic oil level every day, and clean up the steel wheel adhesion.

Lubricate the bearings every 50 hours and check the bolt tightness of the vibrating parts.

Fuel is drained during long-term parking, steel wheel is coated with anti-rust oil.

3.  Common Troubleshooting when it cannot work.

Vibration failure : Check whether the circuit and eccentric block are stuck.

Walking weakness : clean or replace the hydraulic filter element, check the transmission belt.