Cast Steel Rammer Electric Motor

Application:

Cast Steel Rammer Electric Motor is suitable for tamping operations in narrow or complex sites

1.Building ground, courtyard, roadbed, bridge pile backfill compaction.

2.Backfill reinforcement around underground pipelines,only cast steel rammer Electric Motor can finished the work.

3. Sand compaction at the back of highway platform and treatment of municipal road foundation layer.

4. Trench, indoor or field sites inaccessible to medium and large machinery, Our Cast Steel Rammer Electric Motor factory can offer help.

Production parameter :

Operation procedure

1. Start the Tamping Rammer

Make sure the cast steel rammer electric Motor is in a horizontal position before powering on.Press the start button, run for 30 seconds without load, and observe whether the vibration is smooth and no noise.

2. Job operation

Grip the handle with both hands and slowly push the cast steel rammer electric motor forward (speed reference: 8-15m/min).Keep moving at a constant speed and avoid stopping or turning quickly.Keep a distance of more than 10cm from the wall/obstacle to prevent collision.

3. Shutdown steps

Release the start button and cut off the power.After the Cast Steel Rammer Electric Motor is completely stopped, clean up the dirt or debris attached to the rammer.