Jumping Jack Vibrating Compactor Rammer Electric Motor

Thanks to its high impact, flexibility and deep compaction capabilities, Jumping Jack Vibrating Compactor Rammer Electric Motor is a common tool for small compaction projects, especially for complex terrain and local repair scenarios. When selecting, the dynamic type and impact parameters should be considered according to the material type, working environment and compaction requirements.

Production parameter :

Application:

Jumping Jack Vibrating Compactor Rammer Electric Motor is Suitable for tamping operations in narrow or complex sites

1.Jumping Jack Vibrating Compactor Rammer is used when Building ground, courtyard, roadbed, bridge pile backfill compaction.

2.Jumping Jack Vibrating Compactor Rammer is needed when Backfill reinforcement around underground pipelines.

3. Sand compaction at the back of highway platform and treatment of municipal road foundation layer , Jumping Jack Vibrating Compactor Rammer Electric Motor is necessary.

4. Trench, indoor or field sites inaccessible to medium and large machinery, of course, Jumping Jack Vibrating Compactor Rammer Electric Motor is necessary too.

Operation procedure

1. Start the Vibrating Compactor Rammer  

Make sure Vibrating Compactor Rammer is in a horizontal position before powering on.Press the start button, run for 30 seconds without load, and observe whether the vibration is smooth and no noise.

2. Job operation

Grip the handle with both hands and slowly push the Vibrating Compactor Rammer forward (speed reference: 8-15m/min).Keep moving at a constant speed and avoid stopping or turning quickly.Keep a distance of more than 10cm from the wall/obstacle to prevent collision.

3. Shutdown steps

Release the start button and cut off the power.After the equipment is completely stopped, clean up the dirt or debris attached to the Vibrating Compactor Rammer.啊